Coda AMPLIFIER 15.0 Guia do Utilizador descarregar pdf (Página 19)

Charnwood Dynamics Ltd. Coda cx1 User Guide – Coda Basics I - 1

CX1 USER GUIDE - COMPLETE.doc 26/04/04

19/162

Software Installation

If an ADC-64 unit (on an ISA DSP card interface) is not to be used with the system, then

software installation is merely a matter of copying the files into the appropriate directories

(e.g. \Codamotion and \Codamotion\Coda).

When installing files from an installation CD, the system configuration file on the CD is

normally named Codasys_XXX.cfg (where XXX identifies the installation location) so that

if the Codamotion Analysis program is run directly from the CD, it does not try to initiate

the hardware. After copying this file onto the PC’s disk, it must be re-named Codasys.cfg,

and may require editing to setup the serial interface channels correctly (see below).

If an ADC-64 Analogue unit is included in the system, then in addition to copying files into

the appropriate directories, some Windows Registry entries need to be created. This can

be done by double-clicking the Coda.reg file, if any, or by manually editing the Registry:

For all Windows versions:

[HKEY_LOCAL_MACHINE\Software\CODA]

SystemDir=C:\\Codamotion\\coda [string]

For Windows NT/2000/XP (using the CODAmpx30 device driver):

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CODAmpx30]

Type=0x0001 [dword]

Start=0x0002 [dword]

Group=Extended Base [string]

ErrorControl=0x0001 [dword]

[DSP]

Number=0x0001 [dword]

Address1=0x02C0 [dword] (‘2C0’ is the (hex) base address of the ADC-64 DSP

card)

Gait Analysis Report Generation

If you wish to produce clinical gait analysis reports, you will need the MotionDB Report

Generator Application and associated files:

MotionDB V2.24-UK.exe MotionDB Application program file (Version 2.24-UK)

REPORT.cfg

*.pdb

*.rpt

These files are normally installed in a sub-directory of the Codamotion Analysis

Application: \Report Generator

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 161 162

Sem comentários

Coda AMPLIFIER 15.0 Guia do Utilizador Página 19