Coda C3 Guia do Utilizador descarregar pdf (Página 17)

This section of the user guide explains the functions of the C-Net control panel for the C3

DSP amplifiers. For further help and information on the main C-Net application please click

on the help button on the main application. For more detailed help about the C3 control

panel, click the “?” in the right-hand corner of the C3 control panel in C-Net.

User Controls

The control panel for the DSP amplifier allows the parameters to be viewed and adjusted.

The panel may have one of two different formats: A monitoring panel (the „MonIcon‟)

where the status of the amplifier may be viewed, or a full control panel where all the

controls to adjust parameters are located. The full panel has a „tabbed‟ area which allows

you to choose from a number of different areas of interest.

There are some controls such as mute, which are displayed constantly; the remaining

parameter controls being organised into tabbed groups depending upon function.

Monitoring Section (MonIcon)

This allows you to view what is going on inside the amplifier at a glance. There are input

signal level meters showing the input signal level on each input, signal level meter(s) for

each output which indicate signal level relative to the limiter setting for each output, a

thermal meter giving an impression of the temperature inside the amplifier, an amplifier

status indicator showing when an amplifier is protecting itself from damage due to

abnormal operating conditions, and Driver indicator(s) showing when the impedance of a

driver is outside normal range. Generally, the indicators show green whilst all is well and

red when something is wrong.

You may also mute the amplifier inputs using the mute buttons. You can change the view

to the main panel by clicking the “>>” button.

User DSP

The amplifier can either use:

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

Sem comentários

Coda C3 Guia do Utilizador Página 17