
51
ACCESSORIES
CUD20V Vertical U-bracket for D20
CUD20H Horizontal U-bracket for D20
DFA Flying adapter
3-way passive installation system D-Series
HISTORY
Large studio monitors are engineered to produce extended
low frequencies at low levels. Whereas, full range PA loud-
speakers are not really full range; they are optimized for
high efficiency above 60Hz so require additional subwoof-
ers to extend the lower frequency range. There are few if
any professional solutions for a compact cabinet providing
extended low frequency at high SPL. D20 is such a solution
- a compact 3-way point source designed without compro-
mise to provide extended low frequency at high level.
DESCRIPTION
The D20 is a passive 3-way full range compact system,
designed for installation applications where extended low
frequencies and superior dispersion control are required.
3-way coherent point source technology
True full range performance (35 Hz – 20 kHz)
8”/1.75” coaxial driver and 12” extremely high
excursion cone driver
High power handling of 1000 W (AES)
Symmetrical coverage of 90°
Optimized for near-field applications
D20
True full range
3-way point source
D20
TRUE FULL RANGE
The 12” ultra low distortion cone driver covering the range
35 Hz – 400 Hz. with 3” voice coil, ensuring linear excur-
sion, and 3 aluminum shorting rings reduce inter-modula-
tion distortion; minimize induction variation while reducing
thermal compression. This design reduces dramatically
the distortion of a typical subwoofer at longer excursion
levels, and improves the overall sound quality providing
deep and punchy bass.
TRUE COCHERENT
At the heart of the D20 is the newly developed 8”/1.75” co-
axial driver. The 8” cone midrange covers the 200 - 1.800
Hz range. The high frequency driver contains an ultra light
1.75” annular diaphragm providing exceptional transient
response with very high efficiency from 1kHz to 20 kHz.
CONTROLLED DISPERTION AT HIGH SPL
The low and mid range are overlapped in the range 200
– 400 Hz while mid and high range are overlapped in the
1 – 1.8 kHz range. This increases the maximal SPL of the
system providing improved directivity control.
SYSTEM SOLUTION
The D20 is designed to work exclusively with dedicated
Coda Audio LINUS or C3/C5 amplifiers as an integrated
solution for DSP control, amplification, network remote
control and diagnostic. The integrated solution ensures
optimal performance and protection.
OPTIONS
Additional colours and weather protection options are
available on request.
APPLICATIONS
Designed for small to medium installation applications
where extended low frequency range at high level is re-
quired without the use of additional subwoofers.
installation
System components: Coda Audio System Amplifier, Coda Audio System Controller
TECHNICAL SPECIFICATIONS D20
Type: Compact 3-way true full range installation system
Application: Superior quality near-field applications with
extended low range
Frequency response: 35 Hz - 20 kHz (-4 dB)
Power handling AES: 1000 W
Peak power: 4000 W
Sensitivity: 97 dB*
Max. SPL peak: 133 dB**
Dispersion: 90° conical
Components:
Low frequency: 12” woofer, 1000 W (AES)
Mid/High frequency: 8”/1,75” coaxial driver, Mid: 2” (51 mm), High: 1.75”
(44.4 mm) voice coil, 180 W + 80 W (AES)
Crossover: 300 Hz, 1.3 kHz passsive
Nominal impedance: 4 Ω
Cabinets per amp channel: 1***
Input connectors: 2x Neutrik™ NL4MP
Suspension: 10x M6 threated points
Enclosure material: Birch plywood
Finish: Polyurea black coating (water resistant)
Dimensions (WxHxD): 342 x 700 x 425mm
Net weight: 26 kg
Weatherproof version: Optional
* Half-space loading
** Measured with pink noise 6 dB crest factor
*** In low SPL applications up to 2 x D20 per channel can be connected
24481
W
all mount
DSF
Stand fitting
M6
Ring
Comentários a estes Manuais