Coda C45 Guia do Utilizador descarregar pdf (Página 10)

10 C45 User Guide Version 1.0

Technical Specification

Output power (Watts RMS)

per channel 8 Ohm @ 1 kHz 1200

4 Ohm @ 1 kHz 2250

2 Ohm @ 1 kHz 3200

Mono Bridged 8 Ohm @ 1 kHz 4400

4 Ohm @ 1 kHz 6400

THD @ rated power 4 Ohm 1 kHz <0.009 %

20 Hz-20 kHz <0.03 %

Input CMRR >90 dB

Hum & Noise -105 dB

Gain (selectable) +32 dB/+26 dB/+35.7 dB

Sensitivity for

rated output, 4 Ohm +9.75 dBu/+15.75 dBu/+6 dBu (1.5 V)

Damping Factor 1 kHz, 8 ohms >400

Frequency response 20 Hz-20 kHz - +0/-0.5 dB

Input impedance (actively balanced) 20 kOhm

Dimensions (mm) -2U 88 x 482 x 428

Weight 11kgs

Power requirement 230 VAC @ 20 amps max

115 VAC @ 40 amps max

Power requirements

The C45 can be supplied for nominal mains voltage of 115 V or 230 V.

An internal link can be set to either 100 V or 120 V for the 115 V version and 220 V or 240 V for the

230 V version. Normally these are set to 120 V and 240 V respectively.

This amplifier will only operate to its very high specification if it is installed and operated as

described in this manual.

1 2 ... 5 6 7 8 9 10 11 12

Sem comentários

Coda C45 Guia do Utilizador Página 10